View source for Watchguard Firewalls

== Watchguards==
===Watchguard Portal===
[http://www.watchguard.com www.watchguard.com]
===Firebox T20===
Reset Procedure:
 Power off the Firebox.
 Press and hold the Reset button on the back of the Firebox.
 While you continue to hold the Reset button, power on the Firebox.
 Continue to press the Reset button until the Attn indicator begins to flash.
 Release the Reset button. Do not power off the Firebox yet.
 Wait for the reset process to complete. This can take as long as 70 seconds. When the reset is complete, the Attn indicator stays lit and does not flash.
 Power off the Firebox.
 Power on the Firebox.

Default passphrases:
 status/readonly
 admin/readwrite

===XTM 26===
Reset procedure:
 Disconnect the power supply.
 Press and hold the Reset button on the back of the device.
 While you continue to hold the Reset button, reconnect the power supply or power on the device.
 Continue to press the Reset button for 30 seconds, or until the Attn indicator begins to flash. Then release the button. Do not disconnect  the power to the device yet.
 For some XTM 2 Series devices, the Attn indicator does not flash.
 Wait two minutes for the reset process to complete. When the reset is complete, the Attn indicator stays lit and does not flash.
 Disconnect the power supply.
 Reconnect the power supply.
 The Firebox restarts with factory-default settings.
===After Reset===
The unit will be in the following state:

 The device is reset to factory-default settings.
 Interface 0 is enabled as an external interface, as a DHCP client.
 Interface 1 is enabled as a trusted interface with the IP address 10.0.1.1, and DHCP server is enabled.
 Interface 32 is enabled as a trusted interface with the IP address 10.0.32.1, and DHCP server is enabled (Firebox M5600 only)
 The default admin and status management user accounts are available, with the default passphrases.
 The Web Setup Wizard starts automatically when you log in to Fireware Web UI.
 The device is discoverable by the WSM Quick Setup Wizard.

Default passphrases:
 status/readonly
 admin/readwrite

Passwords set to: Topeka123! on the XTM-26.

{{Seealso|[http://www.watchguard.com www.watchguard.com Watchguard Portal]}}